|
In order to assist developers,
engineering consultants, contractors, and planners as they prepare
projects for evaluation by the RWU engineering staff, we are now
providing details, guidelines, and specifications for download.
As revisions, additions, and changes are made, the documents are
updated on this website, and the revision and effective date are given
for each document.
Your Rogers Water Utilities
Engineering contact will inform you of the documents that apply to your
project. Please download them and familiarize yourself with their
contents. Many common questions are answered in these
documents. As always, if you have further questions, your Rogers
Water Utilities Engineering department will be pleased to help.
Current Notices:
(Click HERE for aged notices)
The following sections are hereby revised in the Standard
Specifications For Construction of Public Water and Sewer Improvements
in the City of Rogers and Areas Under the Jurisdiction of Rogers
Waterworks and Sewer Commission, dated August 1996, revised April 16,
1997. All other sections of the said standard specifications remain in effect.
Resolutions and Legal Notices:
Resolution 05-05 and
Resolution 03-07 Regarding Water / Sewer access and hookup fees -
PDF
Resolution 05-05 Approved November 2004,
Resolution 03-07 Approved September 2006, Access Fees effective April
01, 2005, Hookup Fees effective April 01, 2006
Resolution
06-202 Regarding New Sewer rate schedule - PDF
Resolution 06-202 Approved December 2006, first
Sewer Rates increase effective February 01, 2007, second increase
effective February 1, 2008
Supporting Maps for Rates, Assessments, etc.:
Special
Assessment Area Location Maps - PDF
Forms, Agreements, and Other Documents:
Easement Document - DOC
Posted January 21, 2013
Cost
Certification Forms - PDF
Posted January 21, 2013
RWU
Bond Requirements - PDF
Posted April 04, 2007
Engineering Guidelines:
Rogers Water
Utilities Plan Preparation Guideline Checklist - PDF
Effective December 12, 2005
Commercial
Cross Connection Control & Fire Prevention System Guideline Checklist - PDF
Effective February 1, 2006
Rogers
Water Utilities Service Meter Sizing Information - PDF
Effective Feb 21, 2007
Rogers Water Utilities Inspection Checklists:
RWU Water
System Inspection Acceptance Checklist - PDF
Effective February 1, 2006
RWU Sewer
System Inspection Acceptance Checklist - PDF
Effective February 1, 2006
Rogers Water Pollution Control Facility Documents:
Rogers
Pollution Control Grease and Sand/Oil/Water Interceptor Questionnaire - PDF
Effective May 8, 2006
Rogers Pollution
Control Grease Interceptor Sizing Worksheet - XLS
Effective May 8, 2006
Grease Interceptor
Configuration Drawing - PDF
Effective September 15, 2006
Kitchen
Plumbing Directive - Food Service - PDF
Effective June 25, 2008
Solids
Interceptor Directive - Food Service - PDF
Effective June 25, 2008
Specifications
Water Line Material Specifications:
Sewer Line Material Specifications:
Water / Sewer Line Material Specifications:
Water Line Construction Specifications:
| Spec# |
Applies to (Click below to view specification) |
Revised |
| 05-01 |
Pending |
|
| 05-02 |
Pending |
|
| 05-03 |
Directional Bore |
08/21/2006 |
Sewer Line Construction Specifications:
Sewer Line Construction Specifications:
Water / Sewer Line Testing:
Arkansas Department of Health and Human Services
2012 Annual Drinking Water Quality Report
2011 Annual Drinking Water Quality Report
2010 Annual Drinking Water Quality Report
2009 Annual Drinking Water Quality Report
2008 Annual Drinking Water Quality Report
Water Bacteriological Testing Results
All backflow assemblies including commercial, industrial and irrigation systems should be tested annually and reported to Rogers Water Utilities.
All testing should be administered by a licensed backflow technician. If you have any questions please feel free to contact us. For a list of licensed
technicians, click the following link:
Backflow Assembly Testing and Repair
| 
